2024 Toro Greensmaster® TriFlex™ Series 3300 (04510)

Information

2024 Toro Greensmaster® TriFlex™ Series 3300 (04510)

The Greensmaster® TriFlex™ Mowers were designed to take precision cutting on a greens mower to a completely new level. Adopting the proven Flex suspension, the cutting units float freely over contours and undulations of the green resulting in a superior quality of cut and aftercut appearance. Improved serviceability is another major advantage of the TriFlex™ models. The tool-free, quick-change cutting units make servicing the cutting units fast and easy and a lift-gate footrest provides easy access to the center cutting unit.

Features may include:

Lift-In-Turn Cutting Units
  • The suspension system is designed to provide a slight lift to the inside of the cutting units during turns to deliver a consistently level cut and to reduce "triplex ring" for improved playability and turf health.
Faster Transport Speeds
  • Ten miles per hour (16.1 km/h) transport speeds will allow you to stay ahead of golfers and get more greens cut in a shorter time.
DPA Cutting Units
  • The most advanced cutting unit in the industry:Only two adjustmentsSuperior height-of-cut retentionNo daily greasing (stainless steel bearings)Consistent cutting edge regardless of reel wear (patented)Smallest bedknife increment adjustments .007inch (.178mm)
Tool-Free, Quick-Change Cutting Units
  • A single operator can go from cutting Greens at 0.125" (3.2 mm) to cutting a Fairway at ¾" (19 mm) in just minutes. The tool-free, quick-change cutting units make it as easy as 1-2-3.
Exclusive Lift-Gate Footrest
  • Easy access to the center cutting unit facilitates routine maintenance and repairs, simplifies adjustments, and eliminates the need to put the traction unit on a lift for cutting unit service saving you time, money, and frustration.

Photos

Highlights

  • Essex Junction, Vermont
  • 2024
  • Toro
  • Greensmaster® TriFlex™ Series 3300 (04510)
  • Briggs & Stratton® Vanguard®
  • Gasoline
  • Available
  • 80.83" (205 cm) | of Cut Range: Cutting height is adjusted on front roller by two vertical screws and held by two locking cap screws. Bench HOC range is 0.062" - 0.297" (1.6 - 7.5 mm). With high HOC kit, range is 0.297" - 1.0" (7.5 - 25.4 mm). Effective HOC may vary depending on turf conditions and bedknife installed.

Specifications

  • 2024
  • Toro
  • Greensmaster® TriFlex™ Series
  • 3300 (04510)
  • Zero-Turn Mower
  • Briggs & Stratton® Vanguard®
  • Air Cooled
  • 23 HP (17.2 kW) @ 3600 rpm
  • 2-cylinder
  • 1650 rpm
  • 38.3 cu-in. (627 cc)
  • Gasoline
  • Gas | Implement: Single gear pump, valve block, series reel drive to 3 reel motors. | Traction Drive: 2WD
  • No-tool quick adjust steering arm position with power assist allowing a wide range of operator sizes. Steering cylinder has a through shaft design for precise straight line tracking.
  • 2WD parallel hydrostatic or
  • Off - On
  • Hand-actuated parking brake lever with two 6" (15.2 cm) diameter drum brakes mounted on the front wheel motors.
  • 12V
  • Cutting Unit Lift/Lower: 8, 11, 14-Blade Cutting Unit, Roller Options, Roller Scrapers / Brushes | System: 12-volt lead acid, group size U1, with 300 minimum CCA at 0° F and 34 minutes reserve capacity at 85° F/25 amps draw. 50 amp alternator. Seat switch.
  • 19" x 10.5" - 8", 4-ply, Smooth Tread
  • 19" x 10.5" - 8", 4-ply, Smooth Tread
  • Ground Speed - Forward: 0 - 10 mph (0 - 16.1 km/h) | Mowing Speed: 0 - 5 mph (0 - 8 km/h)
  • Sound Power: Sound level of 80 dB(A) at operator’s ear under normal conditions.
  • Blade: 5" (13 cm) | Weldment shaft: 1.375" (35 mm) | Reel Diameter: 21" (53.3 cm)
  • Product: 98" (249 cm)
  • 4.5" (11.4 cm)
  • 80.83" (205 cm) | of Cut Range: Cutting height is adjusted on front roller by two vertical screws and held by two locking cap screws. Bench HOC range is 0.062" - 0.297" (1.6 - 7.5 mm). With high HOC kit, range is 0.297" - 1.0" (7.5 - 25.4 mm). Effective HOC may vary depending on turf conditions and bedknife installed.
  • 70.62" (179 cm) with reels
  • 47" (119 cm)
  • 59" (150 cm)
  • 6 U.S. gal. (22.7 L)
  • 1,161 lbs. (526 kg)
  • Bedknife: Replaceable single-edged EdgeMax™ Microcut Bedknife is standard. | Blade Style/Type: Reel | Number of Blades: 11, 14, 8
  • Cutting Unit Type/Configuration: Triplex, balanced cutting units with precision die-cast aluminum cross member with two bolt-on die-cast aluminum side plates. Cutting units feature quick disconnect for removal/installation and are interchangeable to all positions. Double A-Arm Suspension utilizing sealed ball joints allows free cutting unit motion in pitch and yaw. Links system for the roll. The basket is directly mounted to the cutting unit displacing weight evenly over front and rear rollers. (patented)
  • Hour meter, low oil pressure warning light.