2024 Toro Z Master® 5000 Series 60 in. (152 cm) (72910)
- Year 2024
- Make Toro
- Model Z Master® 5000 Series
- Engine Model: FX
2024 Toro Z Master® 5000 Series 60 in. (152 cm) (72910)
5000 Series 60 in. (152 cm) 25.5 hp 852ccZ Master 5000 Series mowers deliver impressive commercial-grade results and durability, all at an outstanding value. Powerful quality performance from the 25.5 hp Kawasaki FX 852cc engine with 60 in. TURBO FORCE deck.
Features may include:
Deluxe Handcrafted Seat with Arm Rests- Ultimate padding and back support with a handcrafted seat with arm rests and bullhorn logo.
- High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.
- The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.
- (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
- High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
- 7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4" (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.
- A commercial-grade carrier frame, constructed of 3" x 1.5" tubular steel, supports the cutting deck and stands up to the rigors of professional use.
- A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.
- Cools quickly for enhanced durability and performance.
- Managing and growing your business is hard work. Using a business management software system shouldn't make it harder. That is why we built Horizon360. If you can type and point/click a mouse, you have all the skills required.
Engine
Air Filter
Heavy-Duty Canister Air Cleaner
Engine Power
25.5 hp
Engine Manufacturer
Kawasaki
Engine
Model: FX
Displacement
852 cc
Starter
Electric
Fuel System
Fuel Type
Gasoline
Drivetrain
Drive System
Hydraulic Unitized Pumps and Wheel Motors
Steering
Controls: 1-5/8" (4.1 cm) Diameter Grips; Adjustable, Dampened
Wheels & Tires
Wheels
Anti Scalp Wheels: 4 Standard
Wheels, Caster Specifications
13 in. x 6.5 in. - 6 in. (33 cm x 16.5 cm - 15.2 cm) Flat-Free Semi-Pneumatic
Tires, Rear Specification
Drive Tires : 24 in. x 12 in. - 12 in. (61 cm x 30.5 cm - 30.5 cm)
Operational
Operating Speed
Blade Tip Speed: 18,300 ft/min / 5,577 m/min | Forward Ground/Transport Speed: Up to 10.0 mph / 16.0 kph
Hydraulics
Hydraulic Type
Hydraulic Fluid: Premium synthetic
Chassis
Frame Type
Carrier Frame: 3 in. x 1.5 in. x 10 gauge (7.6 cm x 3.8 cm x 10 gauge)
Roll Over Protective Structure
(ROPS): Folding; Standard
Dimensions
Dimensions
Deck Size: 60 in / 152 cm | Box: 91 in. x 70.25 in. x 52.5 in. / 231.1 cm x 178.4 x 133.4 cm
Height
of Cut: 1.0 - 5.5 in. / 2.5 - 14.0 cm
Capacities
Fuel Capacity
12 gal. / 45.4 L / 48 Qt.
Features
Features
Adjustable Discharge Baffle: Standard, Tools-Free | CARB Compliant: Not CARB Compliant | Comfort Platform: Deluxe Suspension with 3-D Isolation Mounts | Front Bumper: Reinforced Bull-Nose | Product Type: Zero Turn Mowers | Product Use: Commercial
Construction Material
Blades: 0.204 in. (0.5 cm) heat-treated steel
Construction Material, Deck
Deck Design: 80-Grade 7-gauge 60" (152 cm) TURBO FORCE® w/bull-nose bumper | Deck Material: 8 Gauge Steel
Chute Type
Discharge Chute: Rubber
Seat Type
Handcrafted Deluxe Suspension Seat with Arm Rests Featuring Bullhorn Accent
Spindle Type
Bearings: Maintenance-free | Housing: 9 in / 22.9 cm Diameter Cast Aluminum