2024 Toro Z Master® 5000 Series 72 in. (183 cm) (72912)
- Year 2024
- Make Toro
- Model Z Master® 5000 Series
- Engine Model: Command Pro EFI
2024 Toro Z Master® 5000 Series 72 in. (183 cm) (72912)
5000 Series 72 in. (183 cm) 26.5 hp EFI 747ccZ Master® 5000 Series - 26.5 hp (19.5kW) Kohler® Command Pro EFI 747cc Engine with 72 in. (183 cm) TURBO FORCE® deck.
Features may include:
Michelin® X® Tweel® Turf Tires- No air pressure to maintain, no flat tires, no compromises. Get extra long wear life two to three times that of a pneumatic tire at equal tread depth.
- Ultimate padding and back support with a handcrafted seat with arm rests and bullhorn logo.
- High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.
- The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.
- (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
- High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
- 7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4" (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.
- Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.
- The new unitized pump and wheel motor use proven commercial hydraulic components while eliminating hoses and other potential leak points. You'll get a smoother, faster response while enjoying an even more reliable machine.
- A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.
- The instrument panel includes a digital hour meter, fuel gauge, and voltage meter, as well as diagnostic indicators for the safety interlock system.
Engine
Air Filter
Heavy-Duty Canister Air Cleaner
Engine Power
26.5 hp
Engine Manufacturer
Kohler®
Engine
Model: Command Pro EFI
Displacement
747 cc
Starter
Electric
Fuel System
Fuel Type
Gasoline
Drivetrain
Drive System
Hydraulic Unitized Pumps and Wheel Motors
Steering
Controls: 1-5/8" (4.1 cm) Diameter Grips; Adjustable, Dampened
Wheels & Tires
Wheels
Anti Scalp Wheels: 6 Standard
Wheels, Caster Specifications
13 in. x 6.5 in. - 6 in. (33 cm x 16.5 cm - 15.2 cm) Flat-Free Semi-Pneumatic
Tires, Rear Specification
Drive Tires : Airless radial 24 in. x 12 in. - 12 in. Tweels (61 cm x 30.5 cm - 30.5 cm) Tweel
Operational
Operating Speed
Blade Tip Speed: 18,500 ft/min / 5,638 m/min | Forward Ground/Transport Speed: Up to 10.0 mph / 16.0 kph
Hydraulics
Hydraulic Type
Hydraulic Fluid: Premium synthetic
Chassis
Frame Type
Carrier Frame: 3 in. x 1.5 in. x 10 gauge (7.6 cm x 3.8 cm x 10 gauge)
Roll Over Protective Structure
(ROPS): Folding; Standard
Dimensions
Dimensions
Deck Size: 72 in / 183 cm | Box: 91 in. x 80 in. x 52.5 in. / 231.1 cm x 203.2 cm x 133.4 cm
Height
of Cut: 1.0 - 5.5 in. / 2.5 - 14.0 cm
Capacities
Fuel Capacity
12 gal. / 45.4 L / 48 Qt.
Features
Features
Adjustable Discharge Baffle: Standard, Tools-Free | CARB Compliant: Not CARB Compliant | Comfort Platform: Deluxe Suspension with 3-D Isolation Mounts | Front Bumper: Reinforced Bull-Nose | Product Type: Zero Turn Mowers | Product Use: Commercial
Construction Material
Blades: 0.204 in. (0.5 cm) heat-treated steel
Construction Material, Deck
Deck Design: 80-Grade 7-Gauge 72" (183 cm) TURBO FORCE® w/bull-nose bumper | Deck Material: 13 Gauge Steel
Chute Type
Discharge Chute: Rubber
Seat Type
Handcrafted Deluxe Suspension Seat with Arm Rests Featuring Bullhorn Accent
Spindle Type
Bearings: Maintenance-free | Housing: 9 in / 22.9 cm Diameter Cast Aluminum