2024 Toro Greensmaster® eTriFlex® Series 3370 (04591)
- Year 2024
- Make Toro
- Model Greensmaster® eTriFlex® Series
- Engine Eight Lithium-Ion batteries.
2024 Toro Greensmaster® eTriFlex® Series 3370 (04591)
2024 Toro Greensmaster® eTriFlex® Series 3370 (04591)
The Greensmaster® eTriFlex models carry no hydraulic fluid and utilize all-electric components for traction, steering, lift and cutting. These EnergySmart® models are operationally friendly with noticeable noise reductions, operational cost savings, and other meaningful improvements to complement the ever-important enhancements in cutting performance.
Combining the innovative, Double A-Arm Suspension System with industry-leading Flex technology, the cutting units float freely over any terrain. The new Radius Dependent Speed (RDS™) System, in combination with the Lift-In-Turn cutting unit leveling feature virtually eliminates the effect known as “Triplex-Ring”. This substantially improves both the aesthetics and playability of the green.
Superior cutting performance is only the beginning. The patented Lift-Gate Footrest, Tool-Free QuickChange™ cutting units, Automatic “Slow-in-Turn” during Transport and Auto-Brake on Operator Dismount are just a few of the many new features that provide added versatility, simplified service, and ultimately, more productivity.
Features may include:
All-Electric Reel Drive- In addition to eliminating hydraulic leaks, each reel motor has a nominal 1.5 horsepower (1.1 kW). This translates into the power you need when you need it for unparalleled performance in your most challenging cutting applications.
- Redesigned clipping capture system maintains a consistent gap between the basket and reel to retain nearly all grass clippings for a cleaner and healthier cut. In addition, a discharge shield forces clippings inside of basket and minimizes "blow-by".
- Dual Precision Adjustment (DPA) cutting units – featuring Toro’s EdgeSeries™ reels combine to deliver a consistent, high quality cut and superior after cut appearance, while reducing maintenance with improved reel edge retention.
- Tires have been redesigned to deliver uniform loading across the entire cross-section (load footprint area) to eliminate side wall loading that can create visible tire tracks.
- With traction, lift, steering, and reel drive all being electric, there are no hydraulic systems on the eTriFlex Series of mowers. Sleep easy knowing that leaks or even the risk of hydraulic leaks are a thing of the past.
Engine
Cooling
air-cooled
Engine
Eight Lithium-Ion batteries.
Cylinder Liners
Electric
Fuel System
Fuel Type
Hybrid | Electric
Drivetrain
Drivetrain
Hybrid | Implement: Three, 48V (1.1 KW), air-cooled brushless permanent magnet reel motors with separable controller. | Traction Drive: 2WD
Steering
48V electric steering motor with torque feedback device. Selective slow down feature for turning in mowing mode. Automatic slow down at high transport speeds when turning.
Drive System
Positive 2WD traction drive: Two, brushless permanent magnet traction motors coupled to a gearbox. 3WD. (patent-pending).
Brakes
Parking Brake
Traction motor regenerative braking; foot pedal service/parking brake, linear-actuated automatic parking brake.
Brake System Type
linear-actuated automatic parking brake.
Battery
Battery
12V / 48V
Electric
Charging System
Off-board high efficiency 1200W smart charger. - AC input voltage 100-240VAC - AC input Frequency 50/60 Hz - Max input Current 14 A - Max charge time, empty to full: 9 hrs.
Electrical
Frequency/Backlapping: 200–520 RPM | Cutting Unit Lift/Lower: 48V | System: 48V System for traction motor circuit, steering motor circuit, cutting unit motor circuit and lift / lower actuator circuit. 12V system for primary controls and brake actuator. Energy capacity: 10.77 kWh; 48V nominal.
Wheels & Tires
Tires, Front Specification
19" x 10.5" - 8", 4-ply, Smooth Tread
Tires, Rear Specification
19" x 10.5" - 8", 4-ply, Smooth Tread
Operational
Operating Speed
Ground Speed - Forward: 0 - 10 mph (0 - 16 km/h) | Ground Speed - Reverse: 0 - 5 mph (0 - 8 km/h) | Mowing Speed: 0 - 5 mph (0 - 8 km/h)
Chassis
Frame Type
Three tie-down locations (2 side, 1 rear).
Performance
Noise Level
Sound Power: 82 db(A) At Operator's Ear: 66 db(A)
Dimensions
Dimensions
Blade: 5" (13 cm) | Weldment shaft: 1.375" (35 mm) | Reel Diameter: 21" (53.3 cm) | Turning Circle (Diameter): 69.8" (182 cm) clearance to cutting unit motor
Length
Blade: 21" (53.3 cm) | Product: 98" (249 cm) with baskets
Ground Clearance
3.8" (9.7 cm)
Height
80.8" (205 cm) | of Cut Range: Cutting height is adjusted on front roller by two vertical screws and held by two locking cap screws. Bench HOC range is 0.062" - 0.297" (1.6 - 7.5 mm). With high HOC kit, range is 0.297" - 1.0" (7.5 - 25.4 mm). Effective HOC may vary depending on turf conditions and bedknife installed.
Overall Width
70.9" (180 cm)
Wheelbase
49.8" (126.5 cm)
Cutting Width
59" (150 cm)
Weights
Weight
Mow: 1274 lbs (578 kg) | Transport: 1,557 lbs (706 kg)
Features
Features
Bedknife: Replaceable single edged, EdgeMax™ Microcut Bedknife is standard on all cutting units. | Blade Style/Type: Reel | Number of Blades: 11, 14, 8
Construction Material
Cutting Unit Type/Configuration: Triplex, balanced cutting units with precision die-cast aluminum cross member with two bolt-on die-cast aluminum side plates. Cutting units feature quick disconnect for removal/installation and are interchangeable to all positions. Double A-Arm Suspension utilizing sealed ball joints allows free cutting unit motion in pitch and yaw. Links system for the roll. The basket is directly mounted to the cutting unit displacing weight evenly over front and rear rollers. (patented)
Gauges
InfoCenter™: Onboard LCD display shows gauges, alerts/faults, service reminders, electrical system diagnostics, low oil pressure, alternator, engine hours, engine rpm, voltage, functional control status, parking brake status, reel speed setting, backlap control, clip control, calibration of 48V components, advanced machine diagnostics.