2024 Toro Groundsmaster® 7200 Series 7200 (30495)

2024 Toro Groundsmaster® 7200 Series 7200 (30495)

Swipe to View More

  • Year 2024
  • Make Toro
  • Model Groundsmaster® 7200 Series
2024 Toro Groundsmaster® 7200 Series 7200 (30495)

2024 Toro Groundsmaster® 7200 Series 7200 (30495)

2024 Toro Groundsmaster® 7200 Series 7200 (30495)

The Groundsmaster® 7200-D/7210-D are zero turn rotary mowers are rugged enough to be called Groundsmasters. A powerful Kubota® 24.8 hp (18.5 kw), 3-cylinder, liquid cooled diesel engine combined with decks that use the industry's toughest spindle assembly match power and durability for commercial operators.

Features may include:

Maneuverability
  • Tight wheel base, power steering and individual steering brakes allow for expert handling and increased productivity.
Folding Rollover Protection System (ROPS)
  • A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.
Operator Comfort
  • The electric-clutch deck engagement is smoother than the manual systems and the new air ride seat suspension glides over the bumps.
Rubber Discharge Deflector
  • The discharge deflector on the 72" (183 cm) side discharge deck is constructed of durable 5/16" (8 mm) thick rubber and allows for close trimming without damaging chute or landscape structures. Patent-pending design provides exceptional dispersion.
Steel Blades
  • The high-strength one-quarter inch (6 mm) thick heat-treated alloy steel blades resist flexing and abrasive wear. The result is a crisp cut time after time.
7-Gauge Welded Steel Decks
  • The deck shells are constructed from high-strength 7-gauge welded steel, for greater durability and long life.
Industry's Toughest Spindle Assembly
  • The cast iron spindle housings feature a massive 9" (22.9 cm) diameter base and eight-bolt mounting pattern that spread impact loads across a broader area of the robust deck shell. The high-efficiency, tapered roller bearings offer greater durability, which means more stability and strength, resulting in longer deck and spindle life.

Engine

Air Filter Remote-mounted 5" Donaldson® air cleaner.
Cooling Liquid Cooled | Description: Rear-mount, cross-flow radiator with 6.5 fins per 1" (25 mm), 8 quart (7.6 liter) capacity.
Engine Manufacturer Kubota®
Cylinder Liners 3
Engine Power 24.8 hp (18.5 kW) gross, at rated speed of 3000 rpm
Engine Torque, Maximum peak: 52.7 ft. lbs. (71.5 Nm) @ 2200 rpm
Displacement 1123cc
Emissions EPA Tier IV Final and Stage V compliant.
Starter Key Start

Fuel System

Fuel Type Diesel / Biodiesel | Fuel Filter: Fuel filter/water separator.

Drivetrain

Drivetrain Diesel
Clutch PTO: Hydraulically actuated wet multi-disc clutch.
Steering Adjustable twin sticks with high performance KYB® hydraulic dampers. Rev/N/Forward, located on sides of operator.

Brakes

Brake System Type Service: Twin levers with dynamic braking through hydrostatic transmission
Parking Brake Hand actuated brake lever with two 10.25" diameter disc brakes mounted on the rear wheel motors.

Wheels & Tires

Tires, Front Specification 24" x 12" - 12", 6-ply, Turf Tire
Tires, Rear Specification 15" x 6" - 6", 4-ply

Battery

Battery 12V

Electric

Electrical System: 12-volt battery (BCI No. 24) 540CCA, 40 amp internal regulated alternator charging @ 3150 rpm

Operational

Operating Speed Ground Speed - Forward: 0 - 12.5 mph (0 - 20 km/h) | Ground Speed - Reverse: 0 - 8.5 mph (0 - 13.7 km/h)

Chassis

Mainframe Structured steel tube and high strength steel plate welded construction, with tie down loops on each corner.

Lights and Safety

Safety Features Safety/Operator Safety: Two-post foldable ROPS standard,

Dimensions

Ground Clearance Capable of climbing 8" (20.3 cm) curbs.

Capacities

Fuel Capacity 11.5 U.S. gal. (43.5 L)
Hydraulic Capacity 3.5 U.S. gal. (13.2 L)
Oil capacity 3.9 U.S. qt. (3.7 L)

Features

Features Blade Style/Type: Rotary | Gauges/Instrumentation: Hour meter, glow indicator, high temp indicator, oil pressure indicator, alternator indicator. | Interlocks: Tractor neutral, operator presence (engine shuts down if operator is not in seat and traction sticks are moved to the operation position), parking brake, PTO on, auxiliary hydraulics on, high temp (PTO shuts down but engine still running), over temp (engine shuts down). | Max Slope Angle: Refer to operator's manual. | Traction Drive: 2WD
Seat Type Two piece, high back cushion seat with drain hole, deluxe low profile suspension, adjustable for operator weight, seat back angle, seat fore/aft position, armrest height, retractable seat belt.

Product Photography